The coop project has moved along to the point that I needed to start thinking about the roof. My design hadn't moved beyond laying out the walls and they had recently been framed in. For a little while I entertained the idea of putting off the roof and just continuing to finish the walls but a few days of rain convinced me that all of our work was going to get ruined if I didn't do something about getting it covered.


My first question in designing the roof was what sort of pitch should be used. I searched around the web for recommended pitches to handle the significant weight of snow that can build up during our Michigan winters. Unfortunately, I was not able to find the information that I wanted so I simply settled on a 6/12 pitch.


I drew up the trusses on the computer and bought all of the supplies. We had some friends over last weekend who were willing to lend a hand so we pulled out the mitre saw and the mending plates and gave it a whirl. Joe and I measured the angles on the drawing, adjusted the saw and made the cuts in the hope that it would turn out as planned. To our surprise, the pieces of the puzzle fit together very well and we began turning out truss after truss.


I now have half trusses mounted on the coop and securely covered with a tarp. I am still shopping around for reasonably priced sheet metal to cover it. In the mean time, it is very satisfying to stand in that half of the coop during a rain storm and watch the rain pour off either side leaving the coop high and dry beneath.