The first part of this series covered building the base for the hoop house. This part covers making the “hoop” part of the house. The first step is to add a 1x4 vertically to the center of the back edge of the frame. We used Gorilla Glue and screws to hold it in place. We also set the end of the 1x4 flush against the floor, to make it easier to hold straight while we were gluing and screwing it. Once we got the screws in, we cut the bottom of the 1x4 even with the bottom of the frame.
Next, we took a 4X16 cattle panel, available at the local farm and ranch store, bent it into an arch and aligned the back edge of it with the back edge of the hoop house base. We fastened it to the outside of the hoop house base with fence staples.
A second cattle panel was bent into an arch and placed overlapping the first one slightly at the center of the house, and aligned with the front edge of the hoop house base. This was also fastened to the base with fence staples.
Where the two panels overlapped, we used hog rings to connect them together.
In the next segment in this series, we’ll show how to build the end walls and door for the hoop house. The chicks and turkey poults will be here in April, so we really need to keep moving with this project!
Until next time, have fun, and think Spring – Cheryl